Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
2SB 6 Secondary Adjusting Arm With Base
2SB-6 Secondary Adjusting Arm With Base.
• The octagon mounting head allows for rough adjustment in any direction. Fine adjustments are achieved by movement of the base using the slots. The position of the mounting head in relation to the slots allows for greater adjusting movement than competitive models.
• Mounting of idlers is achieved by using high strength bolts which secure the inner race of Dalton idler bearings to the positioner.
• Dalton positioners are made of 60-45-10 ductile iron which insures strength and wear resistance.
For orders of 10 or more pieces please contact us or request a quote. You can download the product's 3D model below.
MPN: 2SB-6
$97.60 each
Typically ships in: 2 days
Quantity
Specifications
| o pitch in | 1-1/4 |
| n slot width in | 3/8 |
| m slot width in | 3/8 |
| l thread in | 1/2 |
| k screw in | 3/4 |
| j pitch in | 1/2 |
| i pitch in | 1-7/8 |
| h pitch in | 1-7/8 |
| g height in | 1-11/16 |
| f width in | 1/2 |
| e pitch in | 2-1/8 |
| d width in | 2 |
| c height in | 5 |
| b length in | 3-1/2 |
| a length in | 3-13/16 |
Related Items
D2SB 4 Secondary Adjusting Arm With Base
D2SB-4 Secondary Adjusting Arm With Base.
• The octagon mounting head allows for rough adjustment in any direction. Fine adjustments are achieved by movement of the base using the slots. The ...Read more
Typically ships in: 2 days
D2SB 5 Secondary Adjusting Arm With Base
D2SB-5 Secondary Adjusting Arm With Base.
• The octagon mounting head allows for rough adjustment in any direction. Fine adjustments are achieved by movement of the base using the slots. The ...Read more
Typically ships in: 2 days
D2SB 6 Secondary Adjusting Arm With Base
D2SB-5 Secondary Adjusting Arm With Base.
• The octagon mounting head allows for rough adjustment in any direction. Fine adjustments are achieved by movement of the base using the slots. The ...Read more
Typically ships in: 2 days
Angular base 1A 3
1A-3 Angular base with slotted mounting bolt holes.
• The Angular base is designed for use with the secondary adjusting arm or spring adapter unit when additional tensioning capabilities are...Read more
Typically ships in: 2 days
Angular base 2A 4
2A-4 Angular base with slotted mounting bolt holes.
• The Angular base is designed for use with the secondary adjusting arm or spring adapter unit when additional tensioning capabilities are...Read more
Typically ships in: 2 days
Featured Items
MXN00630 WorkStar® 630 Technician's Rechargeable Headlamp
The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.
In Stock
Simatool - BP 61 Bearing Puller Kit by Simatec
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
Typically ships in: 2 day
Simatool - TP 150 Twin Puller Kit
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
Typically ships in: 2 day
Simatherm - Induction Heater IH 025 Volcano
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat...Read more
In stock