Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
Angular base D2A 4
D2A-4 Angular base with slotted mounting bolt holes.
• The Angular base is designed for use with the secondary adjusting arm or spring adapter unit when additional tensioning capabilities are required.
• The Angular base has slotted mounting bolt holes that permit alignment of the Idler.
• The Angular Base Tensioner is made of high quality Ductile Iron for extra strength.
• The Angular Base is painted with Dalton's special paint to prevent rusting.
For orders of 10 or more pieces please contact us or request a quote. You can download the product's 3D model below.
MPN: D2A-4
$57.70 each
Typically ships in: 2 days
Quantity
Specifications
| length of bolt in | 1-1/2 |
| g thread in | 1/2 |
| f slot width in | 3/8 |
| e pitch in | 2-1/2 |
| d width in | 2-1/2 |
| c length in | 4 |
| b height in | 2-1/2 |
| a height in | 3-1/4 |
Related Items
Angular base D2A 5
D2A-5 Angular base with slotted mounting bolt holes.
• The Angular base is designed for use with the secondary adjusting arm or spring adapter unit when additional tensioning capabilities ar...Read more
Typically ships in: 2 days
Angular base D2A 6
D2A-6 Angular base with slotted mounting bolt holes.
• The Angular base is designed for use with the secondary adjusting arm or spring adapter unit when additional tensioning capabilities ar...Read more
Typically ships in: 2 days
1SA 3 Secondary Adjusting Arm With Angular Base
1SA-3 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1...Read more
Typically ships in: 2 days
2SA 4 Secondary Adjusting Arm With Angular Base
2SA-4 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1...Read more
Typically ships in: 2 days
2SA 5 Secondary Adjusting Arm With Angular Base
2SA-5 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1...Read more
Typically ships in: 2 days
Featured Items
MXN00630 WorkStar® 630 Technician's Rechargeable Headlamp
The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.
In stock
Simatool - BP 61 Bearing Puller Kit by Simatec
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
Typically ships in: 2 day
Simatool - TP 150 Twin Puller Kit
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
Typically ships in: 2 day
Simatherm - Induction Heater IH 025 Volcano
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat...Read more
In stock