Dalton Gear

Angular base D2A 6

D2A-6 Angular base with slotted mounting bolt holes.

• The Angular base is designed for use with the secondary adjusting arm or spring adapter unit when additional tensioning capabilities are required.

• The Angular base has slotted mounting bolt holes that permit alignment of the Idler.

• The Angular Base Tensioner is made of high quality Ductile Iron for extra strength.

• The Angular Base is painted with Dalton's special paint to prevent rusting.

For orders of 10 or more pieces please contact us or request a quote.

You can download the product's 3D model below.

MPN: D2A-6

cad

$62.09 each

Typically ships in: 2 days

Quantity

Specifications


length of bolt in 1-1/2
g thread in 1/2
f slot width in 3/8
e pitch in 2-1/2
d width in 2-1/2
c length in 4
b height in 2-1/2
a height in 3-1/4

Related Items


1SA 3  Secondary Adjusting Arm With Angular Base 1SA 3 Secondary Adjusting Arm With Angular Base

1SA-3 Secondary Adjusting Arm With Angular Base.

• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1...Read more

Typically ships in: 2 days
2SA 4  Secondary Adjusting Arm With Angular Base 2SA 4 Secondary Adjusting Arm With Angular Base

2SA-4 Secondary Adjusting Arm With Angular Base.

• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1...Read more

Typically ships in: 2 days
2SA 5  Secondary Adjusting Arm With Angular Base 2SA 5 Secondary Adjusting Arm With Angular Base

2SA-5 Secondary Adjusting Arm With Angular Base.

• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1...Read more

Typically ships in: 2 days
2SA 6  Secondary Adjusting Arm With Angular Base 2SA 6 Secondary Adjusting Arm With Angular Base

2SA-6 Secondary Adjusting Arm With Angular Base.

• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1...Read more

Typically ships in: 2 days
D2SA 4  Secondary Adjusting Arm With Angular Base D2SA 4 Secondary Adjusting Arm With Angular Base

D2SA-4 Secondary Adjusting Arm With Angular Base.

• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-...Read more

Typically ships in: 2 days

Featured Items


MXN00630 WorkStar® 630 Technician's Rechargeable Headlamp MXN00630 WorkStar® 630 Technician's Rechargeable Headlamp

The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.

In stock

Simatool - BP 61 Bearing Puller Kit by Simatec Simatool - BP 61 Bearing Puller Kit by Simatec

BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more

Typically ships in: 2 day
Simatool - TP 150 Twin Puller Kit Simatool - TP 150 Twin Puller Kit

The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more

Typically ships in: 2 day
Simatherm - Induction Heater IH 025 Volcano Simatherm - Induction Heater IH 025 Volcano

The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat...Read more

In stock