Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
D2SA 5 Secondary Adjusting Arm With Angular Base
D2SA-5 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1/2 inches.
• The secondary arm provides for greater tensioning capabilities in that its position on the Angle base is adjustable.
• This unit is also made of high strength Ductile iron and is painted with Dalton's special paint to prevent rust.
For orders of 10 or more pieces please contact us or request a quote. You can download the product's 3D model below.
MPN: D2SA-5
$127.04 each
Typically ships in: 2 days
Specifications
g length in | 3/8 |
f slot width in | 3/8 |
e pitch in | 2-5/8 |
d height in | 4 |
c thread in | 5/8 |
b width in | 2-1/4 |
a pitch in | 2-1/4 |
Related Items
D2SA-6 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-...Read more
RSPB4 Spring Tensioner On Base Pad.
• The simplicity of design permits great flexibility in application. The spring loaded arm can be adjusted in 8 secure positions that permit operation in a...Read more
RSPB4 Spring Tensioner On Base Pad.
• The simplicity of design permits great flexibility in application. The spring loaded arm can be adjusted in 8 secure positions that permit operation in a...Read more
RSPB4 Spring Tensioner On Base Pad.
• The simplicity of design permits great flexibility in application. The spring loaded arm can be adjusted in 8 secure positions that permit operation in a...Read more
RSPA4 Spring Tensioner On Angular Base.
• This unit provides tensioning and positioning in cases where the mounting surface angle will not permit the use of a base mount tensioner. An excelle...Read more
Featured Items
The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.
In stock
Typically ships in: 2 days
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
In stock
Typically ships in: 2 days
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
In stock
Typically ships in: 2 days
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat r...Read more
In stock
Typically ships in: 2 days