Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
Simatherm - Induction Heater IH 025 Volcano
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat rolling bearings. To do this, simply place the workpiece onto the VOLCANO’s cone shaped heating surface.
• For workpieces with a minimum inner diameter of 20mm up to a maximum outer diameter of 160mm
• For workpieces weighing up to 10kg
• Available for voltages of 100, 115 and 230V
• Also included: 1 temperature probe, 1 pair of protective gloves, 1 carrying case
• PTC (predictive temperature control) for automatic temperature monitoring
MPN: IH 025
$2095.00 each
Typically ships in: 2 day
Specifications
| designation | IH 025/115 V (Art. 110.1103) |
| voltage | 110–120 V |
| frequency | 50–60 Hz |
| power | 1.15 kVA |
| max. amperage | 10.5 A |
| max. weight of rolling bearing bore diameter | 10kg from 20mm inner diameter to 160mm outer diameter |
| temperature range magnetic probe accuracy electronic | 20–180 °C Yes, type K ± 3 °C |
| range of time control time setting in steps | 0.1 minutes |
| maximum temperature approx. | 180 °C |
| variable power level | 5 levels: 20–40–60–80–100% |
| automatic demagnetisation residual magnetism | Yes < 2A/cm |
| dimensions lxwxh | 340 × 250 × 64 mm (over the cone 121 mm) |
| cooling fan | Yes |
Related Items
Simatherm - Hot Plate HPS 200
The electric heating plate HPS (small) was especially designed for heating multiple small components. The temperature of the heating plate can be adjusted by a turning knob in a range of 50&nd...Read more
Simatherm - Induction Heater IH 070
The IH 070 is intended to heat small and medium-sized workpieces. The heating device uses induction as heating method for bearings. Due to the external induction coil the device exemplifies efficie...Read more
Simatherm - Induction Heater IH 090
The IH 090 Induction heater with fan cooling is for small to medium-sized workpieces. Thanks to its integrated air cooling system the IH 090 is built for repeated mounting and continuous use.
...Read more
Simatherm - Induction Heater IH 210
The IH 210 is suitable for heating large workpieces. The IH 210 comes equipped with two yokes. Due to the sliding yoke one can mount and remove the work piece. An additional benefit of the IH 210 i...Read more
Simatherm - Induction Heater IH 240
The IH 240 is designed for fast and safe heating of very large workpieces. A bearing of 445 kg weight may be heated up to 110°C in only 10 minutes. The IH 240 is a stationary ground model. The ...Read more
Featured Items
Simalube 125 ml - SL01-125
125 ml capacity, with multipurpose grease. The compact design of the simalube lubricators makes it possible to apply in tight spaces, as well as with numerous lubricants. Please call for more infor...Read more
In stock
Simatool - BP 61 Bearing Puller Kit by Simatec
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
Simatool - TP 150 Twin Puller Kit
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
Simatherm - Induction Heater IH 025 Volcano
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat...Read more
SX302-125 Simalube Automatic Lubricator
Simalube 125 ml single point automatic lubricator filled with Mobil XHP 222 grease. The compact design of the simalube lubricators makes it possible to apply in tight spaces, as well as with n...Read more
In stock
