Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
2SA-5 - Secondary Adjusting Arm With Angular Base
2SA-5 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1/2 inches.
• The secondary arm provides for greater tensioning capabilities in that its position on the Angle base is adjustable.
• This unit is also made of high strength Ductile iron and is painted with Dalton's special paint to prevent rust.
MPN: 2SA-5
$72.13 each
Typically ships in: 2 days
Specifications
| a pitch | 2-1/4 Inch |
| b width | 2-1/2 Inch |
| c thread | 5/8 Inch |
| d height | 4 Inch |
| e pitch | 2-5/8 Inch |
| f slot width | 3/8 Inch |
| g length | 3-3/8 Inch |
| A - Pitch | 2-1/4 Inch |
| B - Width | 2-1/2 Inch |
| C - Thread | 5/8 Inch |
| D - Height | 4 Inch |
| E - Pitch | 2-5/8 Inch |
| F - Slot Width | 3/8 Inch |
| G - Length | 3-3/8 Inch |
Related Items
2SA-6 - Secondary Adjusting Arm With Angular Base
2SA-6 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1...Read more
D2SA-4 - Secondary Adjusting Arm With Angular Base
D2SA-4 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-...Read more
D2SA-5 - Secondary Adjusting Arm With Angular Base
D2SA-5 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-...Read more
D2SA-6 - Secondary Adjusting Arm With Angular Base
D2SA-6 Secondary Adjusting Arm With Angular Base.
• The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-...Read more
RSPB4 - Spring Tensioner On Base Pad
RSPB4 Spring Tensioner On Base Pad.
• The simplicity of design permits great flexibility in application. The spring loaded arm can be adjusted in 8 secure positions that permit operation in a...Read more
Featured Items
Simalube 125 ml - SL01-125
125 ml capacity, with multipurpose grease. The compact design of the simalube lubricators makes it possible to apply in tight spaces, as well as with numerous lubricants. Please call for more infor...Read more
In stock
Simatool - BP 61 Bearing Puller Kit by Simatec
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
Simatool - TP 150 Twin Puller Kit
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
Simatherm - Induction Heater IH 025 Volcano
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat...Read more
In stock
SX302-125 Simalube Automatic Lubricator Filled with Mobil XHP 222 Grease
Simalube 125 ml single point automatic lubricator filled with Mobil XHP 222 grease. The compact design of the simalube lubricators makes it possible to apply in tight spaces, as well as with n...Read more
In stock
