Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
HFK Series Air Gripper, Multiple Acting Configurations, 40mm Bore Size, M5x0.8 Port Size, 60 c.p.m Max. Frequency
AirTAC HFK Series Air Gripper, Multiple Acting Configurations, 40mm Bore Size, M5x0.8 Port Size, 60 c.p.m Max. Frequency has an integrated design of linear guide roller, high rigidity, and high precision. A positioning pin is attached to the bottom of the linear guide rail to prevent deviation of the positioning rail and body. According to the actual using requirements of customers, the initial position of clamping jaw can be customized to meet different needs under different working conditions. The cylinder can be mounted from three directions, and the postioning hole can improve the precision and the consistency of repeated dismounting and positioning. Check the pdf below, different types of series and styles of Grippers are available for your specific application.
MPN: hfk
Specifications
model | HFK Series |
bore size mm | 40 |
acting type | Multiple Acting Configurations |
fluid | 40 μm filtered Air |
max frequency cpm | 60 |
temperature c | -20~70 |
max operating pressure mpa | 0.7 |
max operating pressure psi | 100 |
port size | M5 x 0.8 |
repeatability mm | ± 0.02 |
sensor switches | Multiple Sensor Configurations |
Related Items
AirTAC HFKL Series Gripper, Multiple Acting Configurations, 10mm Bore Size, M3x0.5 Port Size, 120 c.p.m Max. Frequency has an integrated design of linear guide roller, high rigidity, and high precisio...Read more
AirTAC HFZ Series Air Gripper, Multiple Acting Configurations, 32mm Bore Size, M5x0.8 Port Size, 60 c.p.m Max. Frequency has an integrated design of linear guide roller, high rigidity, and high precis...Read more
AirTAC HFC Series Air Gripper, Double Action, 63mm Bore Size, M5x0.8 Port Size, 60 c.p.m Max. Frequency consists of a bumper in the front of the piston, which can reduce the noise of metal. A cuniform...Read more
AirTAC HFY Series Air Gripper, Multiple Action Configurations, 32mm Bore Size, M5x0.8 Port Size, 180 c.p.m Max. Frequency, has a reasonable gripping angle with a wide range of actual use. It can be mo...Read more
AirTAC HFCQ Series Air Gripper, Parallel Open/Close Hollow Style, Double Action, 16mm Bore Size, M3x0.5 Port Size, ∅3(+0~+0.04) Hollow Diameter, 120 c.p.m Max. Frequency consists of a bumper in the...Read more
Featured Items
The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.
In stock
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
In stock
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
In stock
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat r...Read more
In stock