Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
KGM-N-3210-RH-EE - Ball Screw
KGM-N-3210-RH-EE is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. The interface between the ball screw and the nut is made by ball bearings which roll in matching ball forms. With rolling elements, the ballscrew drive has a very low friction coefficient and is typically greater than 90% efficient. The forces transmitted are distributed over a large number of ball bearings, giving a low relative load per ball comparatively. Available in three preload classes (Type Z1, Z2, Z3) Z1 – light preload to 1-2% Z2 – no preload, clearance held to max indicated in table (standard unless specified) Z3 – no preload, clearance held to max .05mm.
MPN: KGM-N-3210-RH-EE
Specifications
| flange | Not Available |
| material | Steel |
| number of circuits | 3 |
| preload | Optional |
| return style | Single Liner |
| temperature max | 300 °F |
| thread direction | RH |
Catalogs
Related Items
KGM-N-6310-RH-EE - Ball Screw
KGM-N-6310-RH-EE is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. The...Read more
KGM-N-2505-RH-EE - Ball Screw
KGM-N-2505-RH-EE is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. The...Read more
KGM-N-3205-RH-EE - Ball Screw
KGM-N-3205-RH-EE is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. The...Read more
KGM-D-3205-RH-EE - Ball Screw
KGM-D-3205-RH-EE is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. The...Read more
KGM-N-4005-RH-EE - Ball Screw
KGM-N-4005-RH-EE is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. The...Read more
Featured Items
MXN00630 WorkStar® 630 Technician's Rechargeable Headlamp
The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.
In stock
Simatool BP 61 Bearing Puller Kit
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
In stock
Simatool TP 150 Twin Puller Kit
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
In stock
IH 025 Induction Heater Simatherm Volcano
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat r...Read more
In stock