Thomson

KGM-N-2050-RH-EE - Ball Screw

KGM-N-2050-RH-EE is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. The interface between the ball screw and the nut is made by ball bearings which roll in matching ball forms. With rolling elements, the ballscrew drive has a very low friction coefficient and is typically greater than 90% efficient. The forces transmitted are distributed over a large number of ball bearings, giving a low relative load per ball comparatively. Available in three preload classes (Type Z1, Z2, Z3) Z1 – light preload to 1-2% Z2 – no preload, clearance held to max indicated in table (standard unless specified) Z3 – no preload, clearance held to max .05mm.

MPN: KGM-N-2050-RH-EE

Quantity

Request a quote

call_small Call: 1(866)577-4040

Specifications


flange Not Available
material Steel
number of circuits 5
preload Optional
return style End Cap
temperature max 300 °F
thread direction RH

Related Literature & Videos


leadscrews_ballscrews_splines_cten.pdf

Related Literature & Videos


catalogsCatalogs

Ball-Screws-and-Splines

Related Items


KGM-N-5020-RH-EE - Ball Screw KGM-N-5020-RH-EE - Ball Screw

KGM-N-5020-RH-EE is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. The...Read more

KGM-G-1605-RH-E-KK - Ball Screw KGM-G-1605-RH-E-KK - Ball Screw

KGM-G-1605-RH-E-KK is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. T...Read more

KGM-G-2005-RH-E-KK - Ball Screw KGM-G-2005-RH-E-KK - Ball Screw

KGM-G-2005-RH-E-KK is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. T...Read more

KGM-G-3205-RH-E-KK - Ball Screw KGM-G-3205-RH-E-KK - Ball Screw

KGM-G-3205-RH-E-KK is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. T...Read more

KGM-G-2510-RH-M-KK - Ball Screw KGM-G-2510-RH-M-KK - Ball Screw

KGM-G-2510-RH-M-KK is an assembly that converts rotary motion to linear motion (or vice versa). It consists of a ball screw and a ball nut packaged as an assembly with recirculating ball bearings. T...Read more

Featured Items


MXN00630 WorkStar® 630 Technician's Rechargeable Headlamp MXN00630 WorkStar® 630 Technician's Rechargeable Headlamp

The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.

In stock

Simatool - BP 61 Bearing Puller Kit by Simatec Simatool - BP 61 Bearing Puller Kit by Simatec

BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more

Typically ships in: 2 day
Simatool - TP 150 Twin Puller Kit Simatool - TP 150 Twin Puller Kit

The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more

Typically ships in: 2 day
Simatherm - Induction Heater IH 025 Volcano Simatherm - Induction Heater IH 025 Volcano

The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat...Read more

In stock