Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.

3 HP, 3 Phase, 3600 RPM IEC Foot Mounted General Purpose Motor by Elektrim 20MFM 3 3 36
Elektrim 3 HP, 3 Phase, 3600 RPM 20N IEC Foot Mounted General Purpose Motor is intended for the most extreme applications. Due to its high service factor (up to 1.4), the electric motors deliver worry-free starts under excessive load or poor supply conditions. You can download the product's 3D model below.
MPN: 20MFM-3-3-36

Specifications
mounting position protection degree | F3 / IP55 |
enclosure | TEFC |
net weight ship weight | 38 / 41 |
iec design | H |
efficiency | High |
service factor 50hz | 1 |
service factor 60hz | 1.2 |
voltage 60hz | 230/460V |
voltage 50hz | 380V/400V |
ph | 3 |
frame | 90L |
rpm | 3600 |
hp | 3 |
mounting | Foot Mounted |
Related Items

Elektrim 75 HP, 3 Phase, 1800 RPM 20N IEC Foot Mounted General Purpose Motor is intended for the most extreme applications. Due to its high service factor (up to 1.4), the electric motors deliver worr...Read more

Elektrim 75 HP, 3 Phase, 1800 RPM 20N IEC Foot Mounted General Purpose Motor is intended for the most extreme applications. Due to its high service factor (up to 1.4), the electric motors deliver worr...Read more

Elektrim 75 HP, 3 Phase, 1200 RPM 20N IEC Foot Mounted General Purpose Motor is intended for the most extreme applications. Due to its high service factor (up to 1.4), the electric motors deliver worr...Read more

Elektrim 75 HP, 3 Phase, 1200 RPM 20N IEC Foot Mounted General Purpose Motor is intended for the most extreme applications. Due to its high service factor (up to 1.4), the electric motors deliver worr...Read more

Elektrim 3 HP, 3 Phase, 1800 RPM 20N IEC Foot Mounted General Purpose Motor is intended for the most extreme applications. Due to its high service factor (up to 1.4), the electric motors deliver worry...Read more
Featured Items

The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.

BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more

The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more

The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat...Read more
In stock