Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
Shrink Disc RfN 4061-16 - Standard Series/split
RfN 4061-16 Shrink disc is the modern method for creating a mechanical shrink fit. RINGFEDER® Shrink Disc connections are suitable for securing all types of hubs onto shafts and axles.
• Standard series – this is the most popular shrink disc. High transmission values are possible and by varying the screw tightening torque the shrink disc can be adapted to the design specification.
• Maximum reliability – suitable for static, dynamic and impact loads.
• Easy mounting – no steps, keyways, splines are required, therefore hubs can be located and locked at any point or angle on the shaft. RINGFEDER® Shrink Discs use standard screws tightened with standard tools. No additional machining or fitting work is required.
• Easy replacement – the RINGFEDER® Shrink Disc is free from any form fit.
• Easy removal – after loosening the locking screws, the RINGFEDER® Shrink Disc will self release and the hub will move freely on the shaft.
• Simplified manufacture – only plain shaft and bore diameters with easily achieved surface finish and tolerances are required.
• Low susceptibility to contamination – when the locking screws are tightened the functional contact surfaces are pressed firmly together and prevent the ingress of dirt and moisture.
MPN: RfN 4061-16
Specifications
d x d inch | 0.630 x 1.614 |
solid shaft diameter | 0.512 |
pitch circle diameter | 1.063 |
overall length | 0.728 |
overall length without screws | 0.591 |
thrust ring width | 0.246 |
width of ring | 0.472 |
width of the half shrink disc | 0.374 |
max. tightened torque of the screws ft lbs | 3 |
transmissible torque at given ta ft lbs | 66 |
transmissible axial force | 4.05 |
hub surface pressure psi | 48.769 |
equivalent stress in the hub | 83.458 |
max. transmissible torque ft lbs | 81 |
Related Items
RfN 4061-18 Shrink disc is the modern method for creating a mechanical shrink fit. RINGFEDER® Shrink Disc connections are suitable for securing all types of hubs onto shafts and axles.
• Sta...Read more
RfN 4061-20 Shrink disc is the modern method for creating a mechanical shrink fit. RINGFEDER® Shrink Disc connections are suitable for securing all types of hubs onto shafts and axles.
• Sta...Read more
RfN 4061-21 Shrink disc is the modern method for creating a mechanical shrink fit. RINGFEDER® Shrink Disc connections are suitable for securing all types of hubs onto shafts and axles.
• Sta...Read more
RfN 4061-24 Shrink disc is the modern method for creating a mechanical shrink fit. RINGFEDER® Shrink Disc connections are suitable for securing all types of hubs onto shafts and axles.
• Sta...Read more
RfN 4061-30 Shrink disc is the modern method for creating a mechanical shrink fit. RINGFEDER® Shrink Disc connections are suitable for securing all types of hubs onto shafts and axles.
• Sta...Read more
Featured Items
The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.
In stock
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
In stock
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
In stock
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat r...Read more
In stock