Item added to your cart
$product->title
Quantity:
1Price:
$10Subtotal:
$1545
$product->title
Quantity:
1Price:
$10Subtotal:
$1545Add to Cart
Added
Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
• Standard series – this is the most popular shrink disc. High transmission values are possible and by varying the screw tightening torque the shrink disc can be adapted to the design specification.
• Maximum reliability – suitable for static, dynamic and impact loads.
• Easy mounting – no steps, keyways, splines are required, therefore hubs can be located and locked at any point or angle on the shaft. RINGFEDER® Shrink Discs use standard screws tightened with standard tools. No additional machining or fitting work is required.
• Easy replacement – the RINGFEDER® Shrink Disc is free from any form fit.
• Easy removal – after loosening the locking screws, the RINGFEDER® Shrink Disc will self release and the hub will move freely on the shaft.
• Simplified manufacture – only plain shaft and bore diameters with easily achieved surface finish and tolerances are required.
• Low susceptibility to contamination – when the locking screws are tightened the functional contact surfaces are pressed firmly together and prevent the ingress of dirt and moisture.
MPN:RfN 4061-14
d x d inch
0.551 x 1.457
solid shaft diameter
0.433
pitch circle diameter
0.374
width of the half shrink disc
0.197
thrust ring width
0.039
radius
2
max. tightened torque of the screws
13
transmissible torque at given ta
900
max. transmissible torque ft lbs
17
Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
MPN: RfN 4061-14