Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
DMS Series Solid State Sensor, 2-Wire Model, 10V~28V DC Power Supply Voltage, 2.5mA~100mA Switching Current
AirTAC DMS Series Solid State Sensor, 2-Wire Model, 10V~28V DC Power Supply Voltage, 2.5mA~100mA Switching Current, Gray color, is made up of material that is vibration resistant, impact resistant, and bending resistant. There are six different cross sections of this sensor to best suit your application. Check the pdf below to select the DMS Series Solid State Sensor that best suits your application.
MPN: CMS/DMS1
Specifications
model | DMS Series |
power supply voltage | 10V~28V DC |
type | 2-wire |
switching current | 2.5mA~100mA |
temperature c | -10~70 |
contact capacity | 2.8W Max |
current consumption | 3mA Max |
internal voltage drop | 2.7V Max |
leakage current | 0.05 mA Max |
switching frequency | 1000Hz |
impact resistance | 50G |
circuit protection | Reverse polarity protection, Surge Protection |
Related Items
AirTAC EMS Series Sensor, 2-Wire Model, 10V~28V DC Power Supply Voltage, 2.5mA~100mA Switching Current, is made up of flexure resistant curve material in the multi joint manipulator and tank chain....Read more
AirTAC DMS Series Solid State Sensor, 2-Wire Model, 10V~28V DC Power Supply Voltage, 2.5mA~100mA Switching Current, Gray color, is made up of material that is vibration resistant, impact resistant, an...Read more
AirTAC DMS Series Waterproof Solid State Sensor, 2-Wire Model, 10V~28V DC Power Supply Voltage, 2.5mA~100mA Switching Current, Yellow Color, is made up of material that is vibration resistant, impact ...Read more
AirTAC CMS Series Reed Sensor, 2-Wire Model, 5V~240V DC Power Supply Voltage, 100mA Switching Current, Blue color, is made up of material that is vibration resistant, impact resistant, and bending res...Read more
AirTAC CMS Series Heat Resistant Reed Sensor, 2-Wire Model, 5V~240V AC/DC Power Supply Voltage, 100mA Switching Current, Red Color, is made up of material that is vibration resistant, impact resistant...Read more
Featured Items
The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.
In stock
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
In stock
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
In stock
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat r...Read more
In stock