Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
Simatherm - Induction Heater IH 210
The IH 210 is suitable for heating large workpieces. The IH 210 comes equipped with two yokes. Due to the sliding yoke one can mount and remove the work piece. An additional benefit of the IH 210 is its built in air cooling system (IH 210F), which allows continuous operation or even a higher platform for larger work pieces (IH 210XL).
• For workpieces with inner diameter of 60 to 640mm
• For rolling bearings weighing up to 300kg
• Available for voltages of 200, 400–460 and 500–575V
• Also included: 2 yokes, 1 temperature probe, 1 pair of protective gloves
• Extremely simple operation thanks to the sliding yoke
MPN: IH 210
$8813.80 each
In stock i
Specifications
voltage | 400–480 V |
max. amperage | 25 A |
frequency | 50–60 Hz |
max. weight of rolling bearing bore diameter | 300 kg 60–640 mm |
range of time control time setting in steps | 0–60 minutes |
maximum temperature approx. | 400 °C |
temperature range magnetic probe accuracy electronic | 20–250 °C Yes, type K ± 3 °C |
variable power level | 5 levels: 20–40–60–80–100% |
automatic demagnetisation residual magnetism | Yes < 2A/cm |
size of operating area wxh | 250 × 250 mm Optional: 250 × 376 mm (Art. 110.1504) |
coil diameter | 135 mm |
dimensions lxwxh | 650 × 350 × 420 mm |
standard yokes | 70 × 70 × 420 mm for bearings with a bore diameter of at least 100 mm |
power | 10–11.5 kVA |
core cross section | 70 × 70 mm |
cooling fan | Optional (Art.110.1505) |
designation | IH 210/400 V (Art. 110.1501) |
number of standard yokes | 2 |
movable yoke | Sliding yoke |
Related Items
The IH 240 is designed for fast and safe heating of very large workpieces. A bearing of 445 kg weight may be heated up to 110°C in only 10 minutes. The IH 240 is a stationary ground model. The ...Read more
Betex Bearing Induction Heaters, 400V with the unique Betex swing arm construction and support for horizontal and vertical heating. The product maximum temperature is 2400 C (optional ti...Read more
TURBO type of Bearing Induction Heater 400V up to 350kg, an easy to use model including swing arm construction for horizontal and vertical heating. The heater has an ergonomic design for safe opera...Read more
TURBO type of Bearing Induction Heater 500V up to 350kg, an easy to use model including swing arm construction for horizontal and vertical heating. The heater has an ergonomic design for safe opera...Read more
TURBO type of Bearing Induction Heater 600V up to 350kg, an easy to use model including swing arm construction for horizontal and vertical heating. The heater has an ergonomic design for safe opera...Read more
Featured Items
The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.
In stock
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat...Read more
In stock