Please Note: Photo may not represent actual item, please refer to title and product specifications for all details.
Simatherm - Induction Heater IH 070
The Simatherm IH 070 is intended to heat small and medium-sized workpieces. The IH 070 is an induction heater from Simatec. The heating device uses induction as a heating method for bearings. Due to the external induction coil, the device exemplifies efficiency. The performance can be adjusted to four different levels according to the user’s requirements.
• For workpieces with inner diameter of 20 to 400mm
• For rolling bearings weighing up to 120kg
• Available for voltages of 100, 115 and 230V
• Also included: 3 yokes, 1 temperature probe, 1 pair of protective gloves
• Swivel arm available as an option
MPN: IH 070
$4524.10 each
In stock i
Specifications
max. weight of rolling bearing bore diameter | 120 kg 20–400 mm |
frequency | 50–60 Hz |
max. amperage | 20 A |
designation | IH 070/115 V (Art. 110.1302) |
standard yokes | 28 × 28 × 275 mm for bearings with a bore diameter of at least 40 mm |
number of standard yokes | 3 |
voltage | 110–120 V |
size of operating area wxh | 145 × 205 mm |
automatic demagnetisation residual magnetism | Yes < 2A/cm |
coil diameter | 115 mm |
core cross section | 55 × 55 mm |
range of time control time setting in steps | 0.1 minutes |
dimensions lxwxh | 420 × 280 × 345 mm |
variable power level | 5 levels: 20–40–60–80–100% |
power | 2.2–2.4 kVA |
maximum temperature approx. | 400 °C |
temperature range magnetic probe accuracy electronic | 20–250 °C Yes, type K ± 3 °C |
movable yoke | Optional (swivel arm), Art.190.1302 |
Related Items
The IH 090 Induction heater with fan cooling is for small to medium-sized workpieces. Thanks to its integrated air cooling system the IH 090 is built for repeated mounting and continuous use.
...Read moreIn stock
The IH 210 is suitable for heating large workpieces. The IH 210 comes equipped with two yokes. Due to the sliding yoke one can mount and remove the work piece. An additional benefit of the IH 210 i...Read more
In stock
The IH 240 is designed for fast and safe heating of very large workpieces. A bearing of 445 kg weight may be heated up to 110°C in only 10 minutes. The IH 240 is a stationary ground model. The ...Read more
Betex Bearing Induction Heaters, 400V with the unique Betex swing arm construction and support for horizontal and vertical heating. The product maximum temperature is 2400 C (optional ti...Read more
TURBO type of Bearing Induction Heater 400V up to 350kg, an easy to use model including swing arm construction for horizontal and vertical heating. The heater has an ergonomic design for safe opera...Read more
Featured Items
The WorkStar® 630 Technician's Rechargeable Headlamp is a professional headlamp that produces 700/400/150 lumens, runs for 2/4/8 hours.
In stock
BP 61 bearing puller set is designed for easy and quick dismounting of deep groove ball bearings with interference fit on both rings. This ideal tool assortment is suitable for bearing sizes from 1...Read more
The simatool Twin Puller TP 150 can be used to professionally remove deep groove ball bearings and radial shaft seals, regardless of the installation position. 3 dismounting functions in 1 case: to...Read more
The simatherm IH 025 VOLCANO is a portable induction heater for heating small ferritic workpieces. It marks the start of a new era in the field of portable induction heaters. You can use it to heat...Read more
In stock